Fireplace Services
Behind the screen of a prefab fireplace in Markham
Ordering replacement panels by model
Replacement refractory is made for a specific fireplace, and the IHP guide notes that it is supplied through the maker's service dealer. Panels from another unit may share a pattern and still differ in size, thickness or the way they are held in place, which can leave gaps the design never planned for. The IHP warranty itself treats hairline cracks as normal, one more reason not to replace a panel on looks alone.
Our team orders panels for your Markham fireplace by the numbers on its rating plate. The estimate shows the part, how long it takes to arrive and what fitting it involves, so you decide with the full picture.
Fans and blowers on a prefab fireplace
Some factory-built fireplaces carry an optional fan that moves more air through the circulating channels. The IHP guide describes it as an aid to convection rather than a blowing system, with its switch on the lower front face of the fireplace. The fan, the switch and their wiring belong to the listed unit.
A fan that hums, rattles or will not start is checked in Markham with the unit cold and its power off. Our specialists replace it with the fan kit listed for the model, and a wiring fault beyond the fireplace itself is referred to an electrician. Fan work gets a separate estimate line and never hides inside a larger repair.
Doors fully open or fully closed
Prefab manuals are firm about glass doors. The IHP guide says they must be fully open or fully closed while a fire burns, because doors that are only partly open can pull flame out past the frame. It also says the grate and the wood should never touch the doors.
Hinges that sag, tracks that bind and latches that no longer hold make that rule hard to follow. Our specialists adjust or replace those parts on prefab doors in Markham so each panel stays where you put it. The IHP guide also says doors should warm gradually to prevent breakage, worth remembering at the first fire after a repair.
Following water from the chase top down
Where a prefab chimney runs up inside a framed chase, the top of the chase is closed with a metal pan around the pipe and the termination sits above it. Water that gets past a rusted or dented pan can end up inside the chase and, in time, show as rust or stains in the firebox below.
Our specialists in Markham follow rust in a prefab firebox back up the system before replacing anything inside it. A failed chase top gets a separate estimate line, which keeps the fireplace repair and the roofline work easy to tell apart. The water path we found is noted on your written record, so you know what to look for once the next storm passes.
