Problems We Fix
Firebrick and joint repairs for Goldsboro fireplaces
How thick a firebox wall should be
Where a masonry firebox has a firebrick lining of 2 inches or more, the Florida Building Code wants each back and side wall to total at least 8 inches of solid masonry, lining included. When years of fires have worn the firebrick thin, the wall behind it is doing work it was not built for. We check what is left before deciding whether a new lining is enough.
You get that answer in plain words from our family-owned team, and the inspection in Goldsboro costs nothing.
Removing a patch that let go
Fireplace caulk or cement smeared over a crack tends to crack again, darken and peel from the brick. Fresh material laid over an old failed patch has nothing sound to grip. We cut out the old patch, find the true edge of the damage and repair the brick or joint beneath it with material made for the firebox.
If the damage turns out larger than it looked, we stop and show you before extending the work. Call (645) 465-4122 for a free firebox inspection in Goldsboro.
Panels in a factory-built fireplace
Not every firebox is brick. Many factory-built fireplaces use molded refractory panels made for that model, and the Florida Building Code has them installed according to their listing rather than masonry rules. Loose firebrick is no substitute for a cracked panel, so we read the label on the unit before quoting anything.
Panel work is a different repair with its own parts, and we say so plainly. Call (645) 465-4122 and our local team will confirm which kind of fireplace you have in Goldsboro.
Never cool a firebox with water
Water thrown on hot firebrick cools the face suddenly while the inside of the brick is still hot, and that shock can crack it. Let fires burn down and let the brick cool on its own. Fresh cracks that appear right after a firebox was doused are a sign of that kind of shock, and they are worth a look before the next fire.
Our local team checks for new cracks free of charge in Goldsboro and tells you whether they need work.
The ash dump door in the floor
In some fireplaces, a hinged metal door set into the firebox floor lets ash fall into a pit below. The frame can rust, the door can stick or go missing, and the bricks around it work loose. We reset the frame in refractory mortar, replace a door that no longer closes and rebuild the floor bricks around it.
It is a small part that keeps ash and air where they belong. Our family-owned team checks it at no charge during firebox inspections in Goldsboro.
