Our Services
A wood insert installation, piece by piece
Wood inserts installed across Fern Park after a free inspection by our family team.
Sizing the liner to the insert
The insert's flue collar and its manual set the liner diameter. A liner that is too small can starve the fire of draft, and an oversized one can let the exhaust cool and move slowly up the chimney.
We take the size from the manual for your model, never from the old flue. If the chimney cannot fit the size the insert needs, we explain that before you buy, when changing the model is still simple. The liner diameter goes into the written record, so a future replacement starts from the right size.
Exhaust fans and the draft
Kitchen and bath fans, dryers and tight construction can lower the air pressure in a house. One insert manual warns that negative pressure can pull fumes into the living area, which is one reason the insert runs with its door closed.
During the inspection we ask about large exhaust fans near the fireplace and explain how they can affect the draft. Where the manual allows outside air, we tell you whether it suits your home. If the draft in your fireplace has ever suffered when a fan runs, mention it at the inspection.
Starting hot, never overfiring
The high air setting on an insert is for starting and preheating. One manual warns against overfiring, which can overheat the insert and damage its parts.
Our specialists show you the settings for a new fire, a steady burn and an overnight load, as your model's manual describes them. A fire run within the manual's range lasts longer and treats the insert better. Signs of an overfired insert, such as glowing parts, are covered at handover, along with what to do if you see them.
Permits and local inspections
The insert manuals we reference ask owners to contact the local building or fire officials about permits and inspections. What applies depends on the work and on the address.
We discuss the approval path during planning and never assume that a replacement avoids it. Any required inspection is built into the schedule, and the paperwork is kept with the written record of the job. An inspector can see exactly what was installed, since the liner, the tag and the manual are all on record.
