Our Services
Planning the wall, the power and the finish
Same-day inspections in Altamonte Springs when the schedule allows, with the plan explained on site.
No extension cords or power strips
The plug-in manuals we reference say to plug the fireplace directly into a wall outlet, never into an extension cord or a relocatable power tap. A heater draws steady current for long stretches, and a light cord or a crowded strip is the wrong place for that load.
When the nearest outlet is in the wrong spot, the answer is to move the unit or to have an electrician add an outlet where the unit will sit. We settle that choice at the planning stage, so nothing is improvised on installation day.
Sealing an old fireplace for an insert
An electric insert set into a masonry fireplace sits below an open chimney. One plug-in firebox manual asks installers to seal drafts and vents with non-fibrous insulation, which keeps debris from the chimney off the unit and stops room air from escaping up the flue.
We close the old opening with materials that can be removed later and note what we used in the written record of the job. The chimney itself stays intact, so the change can be reversed if a future owner wants a wood fire back.
The overheat cutoff
The built-in manual we follow describes an overheat limit that shuts the heater down when something is wrong, such as blocked airflow. On that model the reset is made at the main electrical panel, and repeated resets mean the unit needs service.
We explain how the cutoff works on your model and when a shutdown calls for a service visit. A unit that keeps shutting itself off is reporting a problem, and it should not be reset again and again.
Plug-in appliance or built-in project
A plug-in electric fireplace is treated as an appliance, while the maker's documentation says hardwired built-in units should be checked against local building codes. Which side of that line a project sits on decides whether it involves more than placing and connecting the unit.
You learn where your project sits and who handles any electrical approval that applies. Nothing is assumed, and nothing is left for you to discover after the wall is closed.
